You all know we have a SolidWorks user group in Seattle, right? The Seattle Area SolidWorks Power User Group (SASPUG) was founded in February 1996 and, as I’ve been told, is the olded user group in the nation. Today’s version has a website, a Facebook page and a Twitter account.
Our next meeting will be March 6th from 5-7pm at Lake Washing Technical Institute.
Ben Gowers from Delcam will be give us a demo and provide a test drive as well.
Hope Rich from Aerotek will be introducing herself to the group.
Bob Jensen, owner of Burgermaster, will talk about how SolidWorks has saved him tons of money.
If push comes to shove, I’ll talk about SWW and try to rope Ken into it as well.
Please RSVP so we can order enough food!
Just to keep you all interested, here’s what’s coming up in the next few posts on Jeff’s Tool Shed:
Boxx is sending me one of their computers so that I can kick the tires and test it out. The cool thing is that I had an Xi at work; had being the operative word there, and I’m getting an HP to replace it. While it won’t quite be a 1:1 comparison, it’ll be close.
I have an interview with Aaron Kelly from Draftsight that I need to transcribe as well as one from Mark Lyons (see, Mark, I didn’t forget!)
Just downloaded Delcam that I’m going to test out.
One of the things I enjoy about SolidWorks World is seeing all the technology out there that one can use with SolidWorks, be it hardware or software. Leading up to the show, I was contacted by Julie Reece, the Director of Marketing for Mcor Technologies. Unlike most marketing people who ask me if I’d be interested in looking at their product, Julie made it quite apparent that I didn’t have a choice in the matter lest I suffer severe bodily harm. (I suppose, too, it might be because I’ve known Julie for a few years now from her days at Z-Corp that I agreed. Plus, I was hoping to score some cool swag.) It was a solid 30 minute interview that I recorded so I would be able to write a comprehensive article. Sadly, my iPhone picked up all the background noise as well, rendering the vast majority of the recording useless. Nonetheless, I’ll shall do my best.
I met with Dr. Conor MacCormack, Co-Founder and CEO of Mcor. Conor and his brother, Fintan, started Mcor in 2005 with the goal of creating an easy-to-use, low cost, full color 3D printer that used stable and readily available materials. They felt, too, that the offerings that were on the market were not environmentally friendly, were expensive and used unstable consumables. They also didn’t want to design such a printer but have it be so expensive that its price point was too high, so they chose a price they wanted to be at and designed to that. From that was born the Matrix and Iris printers.
The media used in these printers is paper. Like the kind you can just go down to Office Depot and get. Regular old letter size paper. The skull you see above? Made from Paper. If that’s not eco-friendly, I don’t know what is. “What about the binding agent?” you ask? Slightly modified white, eco-friendly, glue. Should the need arise you can pour it down the drain, though I don’t know why you’d ever have to. Seriously, why would you need to pour it down the drain? I suppose if you caught your kid dipping fruit in it or…sorry, I digress.
The way that it works is pretty simple. The software cuts your model into paper-thin slices. Each of these slices are then printed on the aforementioned paper. The printer is a standard printer, using Mcor’s proprietary ink. This ink doesn’t just sit on the paper, it permeates it so that your 3D print doesn’t have white lines through it. You then load all the printed sheets into the 3D printer and it takes over from there. Should you drop any of the pages, they’re all numbered so you can realign it all. The printer, too, will recognize if the pages are out of whack and will stop printing. After each page is added, the platen rises up to press it to the existing pages. The blade then cuts the outline of the part and creates cuts outside of the part so you can easily remove the excess material. Lather. Rinse. Repeat. After a few hours, you have your part to play with. Their envelope is 9.4″L x 6.9″W x 5.9″H. You can put multiple prints together to create larger models, using the same glue. With x, y, z resolution of .0004″, .0004″, .004″ and 1,000,000 + colors, those models can be pretty impressive.
Mcor is also in partnership with Staples Office Centre, offering 3D printing to the masses. It would seem to be a strictly European partnership as I couldn’t find anything here on this side of the ocean. Just another case of trying to keep the colonies down, I suppose.
Conor, Fintan, and their team have come up with something pretty cool here. The printers have the ability to produce living hinges, full-color prototypes, and cool models, all in a desktop package. Well, that may be a bit of a stretch. It will fit on a desktop, but you’d want to use the table that comes with the printer. The prints can be sealed and sanded to better improve the resolution and to protect them from water. The examples they had on display were impressive, having been created with paper. The $30,000 price tag on the Iris isn’t too bad, comparatively speaking, but the consumables costs are lower than any others.
Am I sold on Mcor? I certainly like what they can do and I also like that they’re environmentally friendly. Their printing capabilities are on par with other companies out there. Their price point is very good, which should keep ROI on the short side. Taking all that into consideration, yes, I’m sold.